Pionite® High Pressure Laminate (HPL) FA444 Rice Lake Suede

Pionite® HPL caters to traditional tastes with an eye towards versatility. With a broad range of tasteful and timeless designs, combined with long lasting durability, Pionite® brand laminates are designed to enhance a wide range of surface areas.

Pionite® is offered in standard HPL, ThruColor™ HPL, ThickLam™ HPL (thick phenolic), chemical resistant, fire rated, electro-static dissipative, and marker board.

Contact your sales or specification representative for more information on how to customize Pionite® High Pressure Laminate (HPL) for your next project.

Benefits of Pionite® HPL:

• Manufactured in North America
• Larger panels available for best yield
• Easy to clean with long lifetime use
• Patterns, colours, wood grains coordinate with TFL and FRL wall protection panels
• Digital options available for logos and artwork
• Fire Rated available upon request

Guide To Maintaining Pionite® Lamanite Panels:

To maintain the laminate’s lasting beauty, cleaning with a solution of warm water and liquid dishwashing detergent is all that should be required in most cases. Stains may be removed with most non-abrasive household cleaners such as FORMULA 409®, GLASS PLUS® or WINDEX® with AMMONIA D®.

Installation:

Install products in strict accordance with manufacturer’s instructions and approved submittals.

1. Clean substrate of dirt, dust, waxes, and other bond breaking substances prior to beginning installation
2. Follow adhesive manufacturer’s recommendations for set and application times
3. Apply pressure to entire panel face with laminate type roller, removing trapped air and ensure proper adhesion between surfaces

Fabrication Guidelines:

When working with Pionite® HPL, these techniques will produce a quality application

1. Proper conditioning of the laminate, substrate, and backing sheet minimizes possible warping, shrinking, or expansion of assembled panels. Ideally, all components should be conditioned at 70 ˚F to 75 ˚F (21 ˚C to 25 ˚C) and 45 to 50 percent relative humidity for 48 hours prior to assembly.
2. Always bond laminate to a suitable substrate such as medium to high density fiberboard, particleboard, or metals. It should not be glued directly to plaster walls, gypsum wallboard, or concrete.
3. Recommended adhesives include solvent or water-based contact cement, white glue (PVA), epoxy, and hot melt glue. Consult your adhesive supplier for specific application requirements.
4. The use of a backing sheet is recommended to minimize warpage. The thickness of the backing sheet should be relatively equal to the thickness of the decorative laminate on the face of the assembly.
5. All saw blades and router bits used for cutting should be carbide tipped. Feed rate should be slow and tool speed should be high.

Fire Behaviour:

• ASTM-E84 CAN/ULC-S102M Class B
• Fire Rated Class A available upon request

Sustainability:

Pionite® HPL is a trusted brand of Panolam Surface Systems®.

Panolam Surface Systems® is proud to be recognized by this organization with GREENGUARD and GREENGUARD GOLD certification on many of our products. Panolam Surface Systems® is Forest Stewardship Council® (FSC®) Certified

• Boat Interiors
• Kitchen Cabinets
• Kitchen Cabinet Doors
• Kitchen Counters
• Signage
• Window Sills
• Vanity Cabinets
• Vanity Cabinet Doors
• Sink Counters
• Wall Paneling
• Acoustic Paneling
• Wall Protection
• Passage Doors
• Closets
• Garage Storage
• Interior Millwork
• Residential Indoor Furniture
• Commercial Indoor Furniture